Boston Quattro 2296-T review

Boston's Quattro multi-node rack server sets a new record for processing density as its 2U chassis packs in 96 Opteron cores. Read this exclusive review to find out whether blade servers have finally met their match.

Our particular review system looks even better value as the price also includes 32GB of 1333MHz DDR3 memory for each node. If you can afford 16GB DIMMs you can populate each one with up to 256GB of memory. Bear in mind that if you use cheaper non-ECC memory the maximum memory supported is only 64GB.

The motherboard power and SATA interfaces are hardwired through to an extension bar on the side of the node's casing. This connects with the chassis backplane allowing the node to receive power and its three allotted hard disk bays from a single connector.

RAID options are basic as the AMD SP5100 controller can only handle hardware managed mirrors and stripes and can't be upgraded. However, you could use all three bays for each node as single drives and employ Windows Server to manage them as a RAID-5 array.

Remarkably, there's room to expand as each node has a PCI Express x16 slot that accepts a half-height, half-length card. Later versions of this motherboard are expected to have an extra embedded Mellanox InfiniBand CX4 port for high speed server clustering links.

For cooling, the chassis uses four large fans positioned between the nodes and the drive backplane. The modules do not have hot-plug connectors so a single fan failure will require the entire chassis to be powered down to replace it safely.

Power fault tolerance is much better as the chassis has a pair of 1400W hot-plug supplies and their combined output is shared across all nodes. Despite the Quattro's mighty specification it performed very well in our power tests where we linked the system to our inline meter and then powered each node up.

We took measurements with them running in idle and with SiSoft Sandra pushing all cores on each one to near maximum utilisation. In idle we saw one, two, three and four nodes draw a total of 180W, 336W, 460W and 580W and under pressure these figures rose to 385W, 705W, 1029W and 1346W respectively.

Featured Resources

The ultimate law enforcement agency guide to going mobile

Best practices for implementing a mobile device program

Free download

The business value of Red Hat OpenShift

Platform cost savings, ROI, and the challenges and opportunities of Red Hat OpenShift

Free download

Managing security and risk across the IT supply chain: A practical approach

Best practices for IT supply chain security

Free download

Digital remote monitoring and dispatch services’ impact on edge computing and data centres

Seven trends redefining remote monitoring and field service dispatch service requirements

Free download

Recommended

Dell EMC PowerEdge C6520 review: Super dense Gen3 Xeon Scalable
Server & storage

Dell EMC PowerEdge C6520 review: Super dense Gen3 Xeon Scalable

27 May 2021
Dell EMC PowerEdge R750 review: A third-gen Xeon Scalable powerhouse
Server & storage

Dell EMC PowerEdge R750 review: A third-gen Xeon Scalable powerhouse

4 May 2021
HPE ProLiant DL180 Gen10 review: A storage-centric marvel
Server & storage

HPE ProLiant DL180 Gen10 review: A storage-centric marvel

24 Feb 2021
Broadberry CyberServe AM2-B8252 (Tyan TS75-B8252) review: Astonishingly capable
Server & storage

Broadberry CyberServe AM2-B8252 (Tyan TS75-B8252) review: Astonishingly capable

11 Dec 2020

Most Popular

Best Linux distros 2021
operating systems

Best Linux distros 2021

11 Oct 2021
Apple MacBook Pro 15in vs Dell XPS 15: Clash of the titans
Laptops

Apple MacBook Pro 15in vs Dell XPS 15: Clash of the titans

11 Oct 2021
Windows 11 has problems with Oracle VirtualBox
Microsoft Windows

Windows 11 has problems with Oracle VirtualBox

5 Oct 2021